Boral Shingle Repair in Seattle, WA

Boral Shingle Repair: The Seattle Owner’s Guide

Boral shingle repair in Seattle typically runs $280-$520 for most residential jobs, and we stock compatible repair components for same-day service on standard Boral profiles. We see these calls spike in October and March, when the first heavy rains find the cracks that summer heat and winter freeze-thaw have opened in aging shingle tabs. If you’ve spotted a bare patch, a curled corner lifting off the deck, or granules collecting in your gutters like coffee grounds, the shingle’s waterproofing layer has likely failed.

Call (866) 850-9676

Which Boral Models This Applies To

Boral’s U.S. roofing line centers on two shingle families: the Saxony series (900-pound-per-square concrete composite tiles in Slate and Shake profiles) and the lighter-weight Villa and Barcelona concrete tiles common in Pacific Northwest custom builds from the late 1990s through Boral’s 2016 acquisition of Headwaters Roofing. The critical compatibility gotcha: Saxony tiles require Boral’s proprietary Elevated Batten System or a compatible elevated fastening clip. Standard flat-installed repair methods won’t seat properly and will void any remaining material warranty.

To identify your tile, check the underside stamp near the tail edge. Saxony tiles carry a “BX” or “SX” prefix followed by a two-digit color code. Villa tiles use a “V-” prefix. If the stamp has weathered off, measure the exposure width: Saxony Shake exposes 8-1/2 inches, Saxony Slate 10 inches, Villa 11-1/2 inches. Mixing profiles within a field looks obvious from the street and traps water.

We carry OEM Boral replacement tiles for active color lines and source discontinued colors through our salvage network. For common Seattle shades like Cascade Brown, Timberwood, and Pacific Slate, we stock equivalents that match within two years of sun fade. Aftermarket concrete tiles exist, but Boral’s denser mix and integrated color-through formulation outlast most substitutes in our climate by eight to twelve years. We won’t install a part we wouldn’t put on our own mother’s home.

Signs Your Boral Shingle Repair Is Failing

• Cracked or split tile tails. Seattle’s freeze-thaw cycles hit concrete tiles hard. Water wicks into hairline cracks, expands overnight when temperatures dip below 32, and widens the fissure with each cycle. By year fifteen in a north-facing exposure, we’ve seen tails split clean through.
• Exposed underlayment or black felt visible from the ground. This means the tile itself has shifted, broken, or slipped from its fastener. The underlayment buys you limited time, perhaps one wet season, before the decking beneath starts taking on moisture.
• Granule or concrete sediment in gutters. Boral tiles shed surface aggregate as they age. Heavy accumulation signals the protective surface layer has thinned, accelerating water absorption into the tile body and hastening freeze-thaw damage.
• Sagging or uneven tile lines in the field. This points to failed battens, corroded fasteners, or compromised underlayment allowing the tile to settle. The tile itself may be intact, but the system beneath it has given way.
• Interior water stains after wind-driven rain. Boral tiles overlap generously in normal conditions, but south and southwest exposures in Seattle take the brunt of our fall and winter storm tracks. Missing or lifted tiles in these zones let wind push water uphill, bypassing the overlap.

Replacement Cost & What’s Included

What drives the range: roof pitch (anything over 6/12 requires tie-off and slows the crew), tile accessibility (valleys and hips eat time), and whether the failure extends to the fastening system or underlayment beneath. Our estimate includes the tile, matching fasteners, underlayment patch if needed, and disposal. The number we quote is the number on the invoice. Every Boral repair carries our 90-Day Done Right Promise: if it’s not right, we come back and make it right, no paperwork, no arguing.

DIY or Call Us?

Here’s what a homeowner can safely check from the ground or a sturdy ladder at the eaves: look for obvious missing tiles, note the color and approximate location, and check gutters for fresh debris after storms. That’s the limit we’d recommend.

Concrete tile repair on a pitched roof is genuinely hazardous work. Tiles weigh 6-10 pounds each, break underfoot if stepped wrong, and the brittle edges slice through work gloves. Worse, the elevated batten system on Saxony profiles creates a false deck; step between battens and you’re through to the underlayment, or through the underlayment entirely. We’ve been called to fix DIY attempts that turned a $300 tile swap into a $2,400 deck repair. Our background-checked, uniformed technicians carry the proper toe boards, ridge hooks, and tile-handling tools. Most Boral repairs we complete in a single visit. Call (866) 850-9676 and a live person will answer, 24/7, including the middle of a storm.

FAQs